Vapour, Wet & Aqua Blasting in Lincolnshire
Our workshop sits just south-west of Lincoln at Aubourn, close to the A46. That puts most of the county within an hour's drive, and anywhere further can send parts in.
Or call us on 07856 528217
Before
AfterGetting to Us From Lincolnshire
We're at Unit 10, Lincoln Enterprise Park, Aubourn, Lincoln LN5 9FP. Road distances and typical drive times from Lincolnshire:
| From | Distance | Drive | Route |
|---|---|---|---|
| Lincoln | 10 miles | about 16 minutes | A46 |
| Sleaford | 19 miles | about 35 minutes | A607 and A15 |
| Grantham | 24 miles | about 32 minutes | A46 and A1 |
| Scunthorpe | 35 miles | about 49 minutes | A46, A15 and A18 |
| Boston | 37 miles | about 59 minutes | A607, A15 and A17 |
| Grimsby | 44 miles | about 64 minutes | A46 |
Distances and times are approximate road routes and will vary with traffic.
Before
AfterDrop Off or Send In
Customers in the west of the county, around Lincoln, Sleaford and Grantham, usually drop off by appointment. From the coast and the far north and south of the county it's often easier to send parts in. Either way, send photos first.
The workshop is open by appointment only. Please send parts stripped down and ready to blast, as we don't mask. How to send parts in.
Work From Around Lincolnshire
Lincolnshire's work is a mix of farming and agricultural machinery, engineering and manufacturing, marine work on the coast and the Humber, and plenty of classic vehicle restoration.
Everything goes through one of our two services: vapour blasting for aluminium, alloy and detailed parts, or dry blasting for heavily rusted, corroded or coated metal parts that need stripping back.
Questions From Lincolnshire Customers
Do you cover the whole of Lincolnshire?
Yes. Most of the county is within an hour's drive of Aubourn, and parts can be sent in from anywhere.
Which towns are closest?
Lincoln is about 16 minutes away and Sleaford and Grantham are around half an hour.
How long does a job take?
Turnaround is usually 2 to 5 days, depending on the work.
Regular Work for Businesses
A lot of our work comes from garages, engineering firms and workshops that send us parts on a regular basis. Whether it's one batch a month or a steady flow of components, we keep the finish consistent from one run to the next.
Trade Accounts- Quotes
- From photos or drawings
- Turnaround
- 2 to 5 days, depending on the job
- Vapour cabinet
- Parts up to 1000mm W x 1000mm D x 900mm H
- Dry blaster
- Parts up to 650mm W x 450mm H x 450mm D
- Drop off or send in
- Workshop visits by appointment
What Our Customers Say
“Had loads of parts vapour blasted… professional, friendly and excellent quality of finish.”
Chris Briggs
“Had my engine cases Aqua blasted prior to welding. Really well done…”
Rob Gowler
“Charlie vapour blasted some aluminium parts that were very badly corroded… great job.”
Chris Wheeler
Send Us a Few Photos
Send clear photos of the part by WhatsApp or email, with rough sizes and how many there are. We'll reply with a price and the process we'd recommend. Turnaround is usually 2 to 5 days. We reply to photos the same day.
Or call us on 07856 528217, or email sales@vapourmodifiedcomponents.co.uk