Vapour blasting near Nottingham
From Nottingham our workshop is about 31 miles away, roughly a 43 minute drive out along the A52 and up the A46 past Newark.
Or call us on 07856 528217
Before
AfterGetting to Us From Nottingham
We're at Unit 10, Lincoln Enterprise Park, Aubourn, Lincoln LN5 9FP. Road distances and typical drive times from Nottingham:
| From | Distance | Drive | Route |
|---|---|---|---|
| Nottingham | 31 miles | about 43 minutes | A52 and A46 |
Distances and times are approximate road routes and will vary with traffic.
Before
AfterDrop Off or Send In
Nottingham customers split between dropping off by appointment and sending parts in. If you're bringing a batch, send photos first so we can quote and book a time before you set off.
The workshop is open by appointment only. Please send parts stripped down and ready to blast, as we don't mask. Return shipping can be arranged where agreed. How to send parts in.
Work From Around Nottingham
Nottingham brings us engine, gearbox and suspension parts from garages and specialist workshops, components from engineering firms, and restoration parts from enthusiasts.
Everything goes through one of our two services: vapour blasting for aluminium, alloy and detailed parts, or dry blasting for heavily rusted, corroded or coated metal parts that need stripping back.
Questions From Nottingham Customers
How far are you from Nottingham?
About 31 miles, roughly 43 minutes via the A52 and A46.
Can I send parts from Nottingham?
Yes. Send photos first and we'll agree a price and how the parts get here and back.
Do I need to visit the workshop?
No. Many jobs can be quoted from photos and handled by courier or post. Drop-off is by appointment only.
Can you give a fixed price without photos?
Usually not accurately. Price depends on the part size, condition, prep and complexity, so clear photos are the best first step.
Is vapour blasting for aluminium parts?
It is commonly used for aluminium castings and precision components, but we will confirm the process from photos before work starts.
How long does a job take?
Turnaround is usually 2 to 5 days, depending on the work.
Regular Work for Businesses
A lot of our work comes from garages, engineering firms and workshops that send us parts on a regular basis. Whether it's one batch a month or a steady flow of components, we keep the finish consistent from one run to the next.
Trade Accounts- Quotes
- From photos or drawings
- Turnaround
- 2 to 5 days, depending on the job
- Vapour cabinet
- Parts up to 1000mm W x 1000mm D x 900mm H
- Dry blaster
- Parts up to 650mm W x 450mm H x 450mm D
- Drop off or send in
- Workshop visits by appointment
What Our Customers Say
“Had loads of parts vapour blasted… professional, friendly and excellent quality of finish.”
Chris Briggs
“Had my engine cases Aqua blasted prior to welding. Really well done…”
Rob Gowler
“Charlie vapour blasted some aluminium parts that were very badly corroded… great job.”
Chris Wheeler
Send Us a Few Photos
Send clear photos of the part by WhatsApp or email, with rough sizes and how many there are. We'll reply with a price and the process we'd recommend. Turnaround is usually 2 to 5 days. We reply to photos the same day.
Or call us on 07856 528217, or email sales@vapourmodifiedcomponents.co.uk