Vapour blasting for Nottinghamshire customers
We're just over the county line in Lincolnshire, on the A46 corridor that runs down to Newark. That makes the east of Nottinghamshire a short drive away.
Or call us on 07856 528217
Before
AfterGetting to Us From Nottinghamshire
We're at Unit 10, Lincoln Enterprise Park, Aubourn, Lincoln LN5 9FP. Road distances and typical drive times from Nottinghamshire:
| From | Distance | Drive | Route |
|---|---|---|---|
| Newark | 11 miles | about 14 minutes | A46 |
| Mansfield | 30 miles | about 44 minutes | A46 and A617 |
| Nottingham | 31 miles | about 43 minutes | A46 and A52 |
| Worksop | 32 miles | about 40 minutes | A46, A1 and A57 |
Distances and times are approximate road routes and will vary with traffic.
Before
AfterDrop Off or Send In
Newark-area customers usually drop off. From Mansfield, Worksop and Nottingham it's still under 45 minutes, so drop-off by appointment works, but sending parts in is an option if that suits you better.
The workshop is open by appointment only. Please send parts stripped down and ready to blast, as we don't mask. Return shipping can be arranged where agreed. How to send parts in.
Work From Around Nottinghamshire
We see parts from Nottinghamshire's engineering and manufacturing firms, garages and motorcycle specialists, as well as restorers working on classic cars and bikes.
Everything goes through one of our two services: vapour blasting for aluminium, alloy and detailed parts, or dry blasting for heavily rusted, corroded or coated metal parts that need stripping back.
Questions From Nottinghamshire Customers
Which parts of Nottinghamshire are closest?
Newark is about 14 minutes away. Mansfield, Nottingham and Worksop are each around 40 to 45 minutes.
Is it worth driving over or should I post?
For a one-off, a drive and a drop-off is often simplest. For larger or regular batches, talk to us about what works best.
Do I need to visit the workshop?
No. Many jobs can be quoted from photos and handled by courier or post. Drop-off is by appointment only.
Can you give a fixed price without photos?
Usually not accurately. Price depends on the part size, condition, prep and complexity, so clear photos are the best first step.
Is vapour blasting for aluminium parts?
It is commonly used for aluminium castings and precision components, but we will confirm the process from photos before work starts.
How long does a job take?
Turnaround is usually 2 to 5 days, depending on the work.
Regular Work for Businesses
A lot of our work comes from garages, engineering firms and workshops that send us parts on a regular basis. Whether it's one batch a month or a steady flow of components, we keep the finish consistent from one run to the next.
Trade Accounts- Quotes
- From photos or drawings
- Turnaround
- 2 to 5 days, depending on the job
- Vapour cabinet
- Parts up to 1000mm W x 1000mm D x 900mm H
- Dry blaster
- Parts up to 650mm W x 450mm H x 450mm D
- Drop off or send in
- Workshop visits by appointment
What Our Customers Say
“Had loads of parts vapour blasted… professional, friendly and excellent quality of finish.”
Chris Briggs
“Had my engine cases Aqua blasted prior to welding. Really well done…”
Rob Gowler
“Charlie vapour blasted some aluminium parts that were very badly corroded… great job.”
Chris Wheeler
Send Us a Few Photos
Send clear photos of the part by WhatsApp or email, with rough sizes and how many there are. We'll reply with a price and the process we'd recommend. Turnaround is usually 2 to 5 days. We reply to photos the same day.
Or call us on 07856 528217, or email sales@vapourmodifiedcomponents.co.uk